Product specifications

SPlus Operations P13 Connectivity Guide PROCONTROL P13 OPC SERVER
2VAA001153C 21
Figure 3-6: Browser dialog for sample configuration
Add the calculated variables 01ANR10AC101_XJ0J (Analog) and 01DTL10DC101_XS01 (Digital) to the group. Write a
value to both variables and check the display.
Figure 3-7: Writing values to calculated test variables
Writing to the digital value will cause messages in the event client as shown in the following figure.
Figure 3-8: Messages generated by writing to calculated test variables
3.2.4 Licensing
After the installation of the PServer software, you will have an evaluation license which always expires after 15 days.
After this time the PServer will automatically terminate. During this time you have to acquire a registered license code
from ABB Power Automation AG, Switzerland.
For the registration, perform the following steps:
 Start the Licence tool (Procontrol OPC Server -> Pserver - Licence)
 Select Licence->Register.
 Copy the Reference Code from the licence dialog :