Product specifications

SPlus Operations P13 Connectivity Guide S+ P13 OBJECT REFERENCE
128 2VAA001153C
Manual by
disturbance
In Status Symbol marked with red circle.
Automatic
In Status Symbol marked with red circle.
Undefined
In Status Symbol marked with red circle.
Error
6.10.1.3 Trend Tab
The Trim curves tab allows showing a trend of setpoint value, the actual value and the Control value.
Figure 6-46: SetPoint Faceplate- Trend Tab
6.10.1.4 Mode Indication
Setpoint control object can be configured for two modes. The corresponding indication in the Faceplates is showing in
the following table.
Table 6-41: Mode Indication
Mode
Mode Indication
Mode Description
Ramping Mode
-
cannot be input as value.
Setpoint Mode
-
input the setpoint as value.