User's Manual

2
FCC Notice to Users and Operators
FCC Notice to Users and Operators
The SmartPoint
TM
and RoutePoint
TM
wireless routers comply with Part 15 of the FCC rules.
Operation of the SmartPoint and RoutePoint wireless routers is subject to the following two
conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at his own expense. If this equipment does
cause interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to correct the interference by using one of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician.
Caution
This Part 15 radio device operates on a non-interference basis with other devices operating at this
frequency. Any changes or modification to said product not expressly approved by FHP Wireless
could void the user's authority to operate this device.
Introduction
The FHP SmartPoint and RoutePoint Wireless Router Professional Hardware Installation Guide
provides installation instructions for the SmartPoint and RoutePoint wireless routers and is intended
for a trained technical professional. Operation and network configuration for the SmartPoint and
RoutePoint wireless routers are detailed in the FHP SmartPoint and RoutePoint Wireless Router
Configuration Guide.
The installation instructions in this guide apply to the following SmartPoint and RoutePoint wireless
router model numbers:
•
FHP RoutePoint RP-01-00C-C-N-00 (Antennas not provided)
•
FHP SmartPoint SP-01-00C-C-N-00 (Antennas not provided)