User's Manual
Table Of Contents
- FCC Notice to Users and Operators
- Introduction
- Installation Guidelines
- Operating Your Wireless Router
- Safety Information for the Wireless Router
- Service Instructions
16
Operating Your Wireless Router
Step 9 Click OK.
Step 10 Restart your computer.
Accessing the Configuration Utility
To access the configuration utility, complete the following steps:
Step 1 Connect your computer to the port marked Management on the SmartPoint or
RoutePoint wireless router using an IEEE 802.3 RJ-45 crossover cable, as shown in
Figure 14.
Figure 14 SmartPoint and RoutePoint Wireless Router Management Connection
Step 2 Start a web browser (Explorer or Netscape) on your PC.
Step 3 In the URL window of the browser, enter the management IP address of the SmartPoint
or RoutePoint wireless router:
https://192.168.167.166
Step 4 When the Enter Network Password dialog box appears, enter the username admin and
password fhp, as shown in Figure 15, then click OK.
Figure 15 Enter Network Password Dialog Box
Step 5
Once properly logged in, the FHP Wireless Configuration Center screen opens, as shown
in Figure 16.
fhp_010
Management port