User's Manual
Table Of Contents
- FCC Notice to Users and Operators
- Introduction
- Installation Guidelines
- Operating Your Wireless Router
- Safety Information for the Wireless Router
- Service Instructions
15
Preparing to Access the Configuration Utility
Figure 12 Properties Dialog Box
Step 4
Select Internet Protocol (TCP/IP).
Step 5 Click the Properties button. The Internet Protocol (TCP/IP) Properties dialog box opens,
as shown in Figure 13.
Figure 13 Internet Protocol (TCP/IP) Properties Dialog Box
Step 6
Click the Use the following IP address option.
Step 7 In the IP address box, enter the following IP address:
192.168.167.160
Step 8 In the Subnet mask box, enter the following subnet mask:
255.255.255.0