User's Manual

11
Wall Mounting Instructions
Figure 6 Secure Mounting Option
To wall mount the SmartPoint or RoutePoint wireless router, complete the following steps:
Step 1 Decide on the mounting orientation of the SmartPoint or RoutePoint wireless router.
Step 2 Locate two studs on the wall using the stud finder. The SmartPoint or RoutePoint wireless
router should be mounted midway between the two studs.
Step 3 Drill four holes in the wall to accommodate the mounting brackets.
Step 4 Push the four wall anchors into the four holes.
Step 5 Screw the mounting brackets to the wall.
Step 6 Screw the SmartPoint or RoutePoint wireless router to the mounting brackets.
Step 7 Perform a trial installation of the antennas or antenna cables, depending on your
installation.
Step 8 Once you are satisfied with the trial placement of the antennas or antenna cables, remove
the antenna connections from the wireless router and apply two drops of Loctite
Threadlocker 242 to the antenna connector thread, as shown in Figure 7, then install the
antenna or antenna cables.
fhp_011
After fastening
brackets to wall,
use Torx screws
to attach brackets
to SmartPoint