Datasheet

US Catalog | Miniature Circuit Breakers 9
2CDC092011F0014
H Auxiliary contact S2C-H6RU
(change-over contact)
S/H Signal contact S2C-S6RU
ST Shunt trip S2C-A...U
SU200 M
Accessory overview
2CDC022017F0015
H Auxiliary contact S2C-H6RU
S Signal contact S2C-S6RU
ST Shunt trip S2C-A...U
SU200 MR
Description Catalog number
For field mounting: right side S2C-H6RU
Description Catalog number
For field mounting: right side S2C-S6RU
Description Catalog number
For field mounting: right side 12…60 VAC/DC S2C-A1U
For field mounting: right side 110…415 VAC
110…250 VDC
S2C-A2U
Note: For shafts and handles, refer to parts in the Disconnect Switch and MCCB section.
Accessories
SU200M, SU200MR, and S200UDC—UL 489, CSA 22.2 No. 5
S2C-H6RU
S2C-S6RU
S2C-A...U
Auxiliary contacts
The auxiliary contacts will signal whether the breaker is in the ON or OFF position.
Bell alarm
The bell alarm includes a set of contacts that will only signal when the breaker has
tripped. Typically, the contacts would be connected to an alarm or bell to signal the
operator that an overcurrent trip has occurred. The bell alarm also includes a test button
for testing the alarm contacts without opening the breaker.
Shunt trip
For remote tripping of breaker, a shunt trip device can be added to the MCB. The
solenoid device opens the breaker after control voltage is applied.