Technical data

RS485 and RS232 Adapter Installation and Start-up Guide 2-1
Chapter 2 – Installation
This chapter contains instructions for setting up the RS485/RS232 adapter.
WARNING! Verify that the ACS 160 is not powered before starting
the installation. Follow the safety instructions given in this Guide
and in the ACS 160 User’s Manual.
Figure 2-1 Exploded view of the CFB-RS Adapter Module
Drive connection Cable
Base
Cover
Cover Screws
(4 pcs)
Cable Glands
for Bus Cables
(2 pcs)
Mounting Screws
(2 pcs)
Circuit Board
Assembly