Technical data

907 KP 95 / Issued: 09.97

CEs

READ DSP FROM THE AF100 COUPLER 07 KP 95 DSPIN

#CT DIRECT CONSTANT

At the input #CT the transmission interval (cycle time) is

defined in ms. This input defines, how many times a DSP

is transmitted on the bus.

Valid values: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512,

1024, 2048, 4096

VAL BINARY

At the output VAL it is indicated, that the data of the confi-

gured flag ranges are valid. The output VAL is reset to

zero, if within (3 * #CT) no valid data has been received.

ERR BINARY

At the ERR output it is indicated, whether an error has oc-

curred.

In case of an error (partner is no 07 KP 95 or the AF100

coupler 07 KP 95 disables the dual–port RAM), the output

ERR is set to 1.

The inputs and outputs can neither be doubled nor in-

verted.

____________________________________________________________________________________________

CE data

Runtime: 07 KR 91/07 KT 92/07 KT 93

Basic runtime: µs

Additional runtime:

Updating of the outputs: yes

Number of historical values: 0 words

Available as of: ABB Procontic CS31 07 KR 91 R202/R252 index c

07 KT 92 R202/R262 index c

07 KT 93 R101 index f

07 KT 93 R171 index f