Technical data

5
907 KP 95 / Issued: 09.97
CEs
READ DSP FROM THE AF100 COUPLER 07 KP 95 DSPIN
FBD/LD
IL
DSPIN
EN
#ID
#NB
VAL
ERR
!BA
DSPIN
0
#0
M 00,00
#1
#2
M 10,00
M 00,00
#1
#2
M 10,00
#1
A 00,01
SM
#NI
SMW
#NIL
SMD
#NR
DSPIN
EN
#ID
#NB
VAL
ERR
SM
#NI
SMW
#NIL
SMD
#NR
A 00,00
MW 05,00
#3
MD 05,00
#1
#1
MW 05,00
#3
MD 05,00
#0
SR
#ST
#CT
SR
#ST
#CT
MD 06,00
#1
#1024
MD 06,00
#1
#1024
A 00,00
A 00,01
Parameters
EN BINARY E, M, A, K, S Enable block processing
#ID DIRECT #, #H Identifier, results together with #ST into
CONSTANT the definite identification of the DSP on the
AF100 bus; valid values: 1...50 *)
#NB DIRECT #, #H Number of the packed binary values (32 values) of the
CONSTANT DSP; valid values: 0...8
SM BINARY E, M, A First flag of the binary range
#NI DIRECT #, #H Number of the word values;
CONSTANT valid values: 0...8
SMW WORD MW First word flag of the word range
#NIL DIRECT #, #H Number of the double words of the DSP;
CONSTANT valid values: 0...8
SMD DOUBLE WORD MD First double word flag of the double word range
#NR DIRECT #, #H Number of real values;
CONSTANT valid values: 0...8
SR DOUBLE WORD MD First double word flag of the real range
valid values for #NB, #NI, #NIL and #NR:
#NB + #NI + #NIL + #NR <
8 and
#NB + #NI + #NIL + #NR >
1
#ST DIRECT #, #H Station address;
CONSTANT valid values: 1...80 *)
(128 for the status of an other station)
#CT DIRECT #, #H Transmission interval (cycle time) in ms;
CONSTANT valid values: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512,
1024, 2048, 4096
VAL BINARY A, M Data are valid
ERR BINARY A, M An error has occurred
_________________________
*) With #ST = 128, #ID = station address of the desired station (valid values 1...80), #NB = #NI = #NR = 0 and #NIL = 1 it
is possible, to interrogate the status of the station using the address #ID. The status (32 bits) is then available under
SMD. The status is coded binary and equals the DIAG output of the AF100 function block.