Technical data

1–1
07 KP 95 / Issued: 09.97
Installation
1 Installation of the CE definitions 907 KP 95
____________________________________________________________________________________________
Programming of the communication module 07 KP 95 is
done via PC with the programming system 907 PC 331.
All connection elements, which are necessary for opera-
tion of the 07 KP 95 are delivered on a 3.5” diskette to-
gether with this description.
During installation, the write protection of the diskette
must not be switched on.
1.1 Contents of the diskette
The diskette contains
● CE definitions AF100, DSPIN, DSPOUT,
DWREAL and REALDW for 907 PC 331
1.2 Installation of the CE definitions
Proceed as follows to install the CE library:
● Select the directory of 907 PC 331 for CS31:
C:\>cd\abb–sps\cs31
C:\ABB–SPS\CS31> _
● Up to version 04/96 of the software 907 PC 331
R302 the following command must be entered:
COPY A:\MPST_KR1.TRS
In doing so, the mentioned file will be copied into
the directory C:\ABB–SPS\CS31. With later ver-
sions of 907 PC 331 the file must not be copied.
● Start 907 PC 331 for CS31:
C:\ABB–SPS\CS31> cs31
● Select any project:
● Enter the name of the library into which you wish to
put the connection elements AF100, DSPIN,
DSPOUT, DWREAL and REALDW as the library
name, e.g.: BIB\CS31. Now leave the project data
editor with <ESC>. The main menu of 907 PC 331
now appears.
● Select the menu point:
’Library/Read manufacturer library’. The computer
asks you about the path of the block to be read. De-
lete the statement for the path name and enter the
following:
A: 907KP95E
● The computer now reads in the library.
The necessary connection elements for the 07 KP 95 are
now available in the library ”BIB\CS31”.