Installation manual

GoodWe

Connect the inverters to each other

•

Connect using a network cable (patch cable).

•

Where to connect: RJ45 socket on the outside of the inverter.

Procedure

1. InserttheRJ45plugininverter1intotheRJ45socket.

2. InserttheotherendofthewireintotheotherRJ45socketoninverter2.

3. Connecttheotherinverterstoeachotherinthesameway.

4. InserttheterminalblockconnectorintotheSolar-Log™RS485/422Bsocket.

5. Terminateinthelastinverteraccordingtotheinverterinstructions.