MSDS
2 (3)
Doc. no.
1SFC151001D0201
Rev. ind.
Version 0
Date 2001-11-05
Automation Technology Products AB
2. Environmental Information
2.1 Content of hazardous materials
Declare the presence of hazardous materials in the product. Printed circuit boards are
declared separately under 2.1.1 and should be excluded from the declaration in the table
below.
Material Example application Yes No
Quantity/unit
Optional
(1)
Lead Batteries, cables X On each circuit board
Cadmium Batteries, switches, additive in lead X
Mercury Batteries, switches X
Beryllium Contact springs X
Brominated flame
retardants, e.g:
PBB, PBDE, TBBPA
Additive in plastics or rubber X
HCFCs, e.g:
R 22, R 123, R 141b
Cooling media X
SF6, sulphurhexafluoride Breakers X
Polyvinyl chloride, PVC Cables X
(1) Strive to declare the quantity. This is optional, however, since it is today sometimes difficult to retrieve such information,
especially regarding supplied components.
2.1.1 Printed circuit boards
Specify the amount of printed circuit boards used in the product by declaring the total
board surface:
< 1 dm
2
1-10 dm
2
> 10 dm
2
No printed circuit boards used in the product