Specifications
Application note Connecting CP600 to motion products via Modbus RTU AN00200-003
ABB Motion control products 13
www.abb.com/motion
Notes:
1. The 7v output on MicroFlex / MotiFlex e100 and e150 products should not be connected. Ensure pin 4 at the e100 RJ12
connector is isolated from any external connection
2. Do not connect 5v output on PLCs to any external connection
3. Do not connect 5v output on CP600 to any external connection
4. When using RS422 ensure a 120 ohm terminating resistor is fitted across RX+ and RX- at each end of the serial network
(this may be via a terminator switch if one is provided on the product)
5. When using RS485 ensure a 120 ohm terminating resistor is fitted across + and – at each end of the serial network (this
may be via a terminator switch if one is provided on the product)
6. To use the CP600 HMI in 2 wire RS485 mode you must link the two – pins (3 and 4) together and the two + pins (7 and 8)
together
Example connections:
CP600 to NextMove e100/ESB-2 via RS232
1 5
3 2
4 3
7 7
8 8
CP600 to NextMove e100/ES/ESB-2 via RS422
1 5
8 8
3 2
7 7
4 3
CP600 to MicroFlex e100 / MotiFlex e100 / MicroFlex e150 via RS485
1 3
7 1
8
3 2
4
CP600 to MicroFlex e150 via RS422
1 3
8 4
3 5
7 1
4 2
Contact
ContactContact
Contact
us
usus
us
For more information please contact your
local ABB representative or one of the following:
www.abb.com/motion
www.abb.com/motionwww.abb.com/motion
www.abb.com/motion
www.abb.com/drives
www.abb.com/driveswww.abb.com/drives
www.abb.com/drives
www.abb.com/drivespartners
www.abb.com/drivespartnerswww.abb.com/drivespartners
www.abb.com/drivespartners
www.abb.com/PLC
www.abb.com/PLCwww.abb.com/PLC
www.abb.com/PLC
© Copyright 2012 ABB. All rights reserved.
Specifications subject to change without notice.
CP600
NextMove
CP600
NextMove
CP600
e100/e150 drive (Dip switch 2
ON to connect 120R resistor
when using e150)
120R
120R120R
120R
120R
120R120R
120R
120R
120R120R
120R
120R
120R120R
120R
CP600
e150 (Dip switch 1 ON
to connect 120R
resistor)
120R
120R120R
120R
120R
120R120R
120R










