User guide

F) Table of Printer Devices and Pre-set Profiles
Pre-set profiles that contains the Printer Device Parameters.
PRINTER DEVICE NAME created in
WINDOWS
PRE-SET PROFILE that must be associated to
the PRINTER DEVICE NAME
HTP500 V2 TERMINAL BLOCKS
SINGLE TB T-BLOCKS
HTP500 V2 CABLES
AUTOM CABLES
HTP500 V2 HORIZ METHACRYLATE
MMA HORIZONTAL Plates
HTP500 V2 HORIZ PVC LABELS
PVC HORIZONTAL
HTP500 V2 VERTICAL PVC LABELS
PVC VERTICAL
HTP500 V2 OTHER TERMINAL BLOCKS
AUTOM AF T-BLOCKS
3.5 CENTERING
The centering allows you to makes some corrections at the print start point. The coordinates
(x,y) can be modified for to move the starting point on the right, left, to the top, or at the
bottom.
a.1) Run the HTS500Hip
a.2) Select ‘File’, Select ‘Plotter Setup’
a.3) Select the centering button (the second of the three buttons for each device)
a.4) Check the box ‘Thermal Transfer Printer’.
It is possible to make corrections on the starting position inserting a relative value express
with a hundredth of millimetre precision.
To move the print starting:
At the top
Type in a positive value for the Y axis
At the bottom
Type in a negative value for the Y axis
On right
Type in a positive value for the X axis
On left
Type in a negative value for the X axis
To verify the print starting position it is possible utilize any available item and compatible with
the selected device.