User guide

2.5 LOADING A RIBBON CASSETTE
Load a ribbon cassette performing the instructions shown in the pictures below.
1) Remove the ribbon cassette stopper and take care the ribbon is well wound.
2) Install the cleaning cassette first, then insert the ribbon cassette and close the
cassette cover.
2.6 TURNING THE POWER ON / OFF
2.6.1 Turning the Power On
1) Ensure that the power cord is properly connected.
NOTICE
Never remove the cleaning cassette without unlocking the cleaning auxiliary roller first or
the cleaning cassette tape could be damaged.
REMIND
When the end of the cleaning cassette tape is reached, use the automatic cleaning mode
function to keep on printing without damaging the print head.
NOTICE
The printer can’t detect the ribbon if the ribbon cassette or the ribbon itself is loose. When
inserting the ribbon cassette ensure the ribbon is not loose and push the cassette untill it
touches its mount.
Wipe in the tape until
the tape is tighten
Make sure the ribbon
cassette touches its
mount