Brochure

RCD Type F | 13
Any earth fault can be immediately identified
through the blue indicator, that signals the
differential tripping and which cannot be activated
in case of manual operation on the toggle. This
prevents any misinterpretations of the device and
system status.
The terminals available on DS201 make easier the
supply operation in parallel with busbars as they
are composed by two different seats, a front seat
for 25 mm
2
cables and a back seat for
10 mm
2
busbars.
All the devices of the DS201 series have been
tested in a wide range of temperatures:
from -25 °C (as indicated by the snowflake marked
on the front side) up to +55°C.
Label carrier for clear and reliable identification.
With the practical label carrier fitted in the new
circuit breakers you can give maximum visibility to
the information relating to the protected loads.