User's Manual
Table Of Contents
- 1 Installing the Tropos MetroMesh Router
- Preparing for Installation
- Mounting Strategies
- Proper Use of Hose Clamps
- Pole, Tower, and Streetlight Mounting Instructions
- Connecting Cable Attached Antennas
- Grounding the Tropos 5320 Router
- Connecting Power
- Connecting a Data Port
- Resetting the Router
- Connecting Peripherals
- Battery Backup Operation
- Safety Information for the Tropos MetroMesh Router
- 2 Power Consumption
- 3 Product Specifications
- 4 Approved Antenna Configurations and Attenuation Settings
- 5 Antenna Specifications and Patterns
- 6 Installation Accessories
- 7 AC Wiring Diagrams
- 8 Wind Loading Considerations
- 9 Canopy Installation Instructions
- 10 Cable Termination Instructions
- Index
Grounding the Tropos 5320 Router
Tropos 5320 MetroMesh Router Installation Guide 22
Figure 12 Grounding Arrangement
Ground the Tropos 5320 MetroMesh router
1. Insert the grounding screw into the grounding screw hole on the bottom of the router.
2. Connect a length of #10 AWG bare copper wire to the grounding screw and tighten.
3. Connect the other end of the grounding wire to a grounding strap that is attached to a
grounded surface or other earth ground, such as a grounding rod.
trp_104
10 AWG wire
to ground
Grounding strap
on pipe or grounding rod
Grounding
screw