Installation Manual

Mechanical installation
30
6.3 Move the socket
Preliminary requirements
1. The plugs for the
mounting screws are
installed.
• Screwdriver
Procedure
1. Remove 2 screws and remove the
front cover.
2. Remove 11 screws and remove
the maintenance door.
3. Remove the screw(A) on the left
side of socket.
4. Move the socket away.
6.4 Install the upper mounting screws
Preliminary requirements
1. The plugs for the upper
and lower mounting
screws are installed.
• Mounting screws. Refer
to section 10.6.
Procedure
1. Install the mounting screws (A)
through the holes (B) in the
charger.
2. Lock the screws in the plugs. For
the specification, refer to section
10.7.