Installation Manual

Site preparation
28
1. The site must be suitable to install the EVSE. Refer to section 5.2.
5 Site preparation
5.1 Select the site
1. Find a suitable site on a wall. For the specifications of the wall, refer to
section 10.7.
2. Make sure that the correct power supply is available. For the power
supply specifications, refer to section 10.10.
3. Obey the space requirements. Refer to section 10.9.2.
5.2 Prepare the site (North America, Terra AC Wx-Px-xxxxx)
Preliminary requirements
Procedure
1. Make sure that the space and the airflow around the EVSE are sufficient.
Refer to section 10.9.2.
2. Make sure that the correct cables are available at the site.
• AC input cable. Refer to section 10.12.1.
• RS485 cable. Refer to section 10.12.3.
• Ethernet cable. Refer to section 10.12.2.
5.3 Tools Required for Installation
Tools
Applicable Models
Supplier Name
Supplier Part#
Security Torx T25 L-
Driver
All Product Models
Commercially Available
Commercially Available
Security Torx T20 Drive
All Product Models
Commercially Available
Commercially Available
Wire Cutters
All Product Models
Commercially Available
Commercially Available
Wire Strippers
All Product Models
Commercially Available
Commercially Available
Channellock Pliers
All Product Models
Commercially Available
Commercially Available
Torque Wrench
All Product Models
Commercially Available
Commercially Available
Drill
All Product Models
Commercially Available
Commercially Available
Drill Bits
All Product Models
Commercially Available
Commercially Available
Slotted Screwdriver
All Product Models
Commercially Available
Commercially Available
P2 Phillips Screwdriver
All Product Models
Commercially Available
Commercially Available
P3 Phillips Screwdriver
All Product Models
Commercially Available
Commercially Available
Crimpers, 8 AWG
All Product Models
Commercially Available
Commercially Available
Crimpers, 1/0 - 8
AWG(optional)
All Product Models
Commercially Available
Commercially Available