Installation Manual

Safety
26
• Make sure that adults supervise this EVSE is when it is used around children.
• Do not put fingers into the EV connector.
• Do not use this product if the flexible power cord or EV charge cable is
frayed, has broken insulation, or any other signs of damage.
• Do not use this EVSE if the enclosure or the EV connector is broken,
cracked, open, or shows any other indication of damage.
• Install an insulated grounding conductor that is identical in size,
insulation material, and thickness to the grounded and ungrounded
branch-circuit supply conductors, except that it is green with or without
one or more yellow stripes, as part of the branch circuit that supplies the
EVSE.
• Connect the grounding connector of the previous bullet point to earth
at the EVSE or, when supplied by a separately derived system, at the
supply transformer.
• For the AC power input wiring installation, refer to section 10.11.4.
• For the torque requirements for the screws of the terminal block for
the AC power, refer to section 10.14.
SAVE THESE INSTRUCTIONS