User's Manual
Table Of Contents
- 1 Introduction
- 2 Installing the Router
- 3 Installing Battery and Power Backup Accessories
- 4 Power Consumption
- 5 Product Specifications
- 6 Antenna Information
- Abbreviations
- Index
Chapter 3
Tropos Routers Installation Guide, Models 6410 and 6420 39
The deployment scenarios are shown in Figure 14. When using the BB063001 BBU, it should be
mounted on the mounting bracket of the 6420/6410 router. When using the PS079001 PoE
injector without the BB063011, it can be mounted on the mounting bracket of the
6420/6410 router. The PS079001must be remote mounted when used with the BB063001.
FIGURE 14 Deployment Scenarios
Table 7 lists ordering information.
TABLE 7 Ordering Information
Part Number Description
Required Components
Ordered Separately
PS079001 Outdoor PoE Injector, non-photocell Power cable, one of the following:
• PT021004 power cable, 4 feet, 2-wire, pho-
tocell
• PT021020 power cable, 20 feet, 2-wire,
photocell
• PT031006 power cable, 6ft, 3-wire, water-
tight plug
• PT031030 power cable, 30ft, 3-wire, water-
tight plug,
MB008003 mounting bracket kit (if required)
BB063001 External Battery Backup Unit • Outdoor rated Ethernet cables
• PS079001 power supply
MB008003 Kit, mounting bracket, PS079001/
BBU063001