Datasheet

4
1SNK161029S0201
End stops Jumpers End sections Circuit Separators
Choose between the robust
BAM3 and the high BAZH1 for
double deck and power blocks.
All compatible with label holders.
Simplify the block interconnection
with the isolated screwless jumper
JB… available for 4 to 16 mm²
10 to 4 AWG terminal blocks.
One end section ES4 for the core
feed-through range from 4 mm²
to 95 mm² 10 to 000 AWG. Just
three ends sections needed for
the entire SNK series range.
Separate and easily visualize dif-
ferent parts of your assembly with
the universal circuit separator
CS-R1.
Testing Solutions Shielding Covers Plugs
Test your assembly up to 15 poles
with the test connector TC… or
simply control the voltage with the
test adaptor TP for 2, 2.3 or 4 mm
test plug diameter.
Ensure the continuity of your shield
connection with the SHB… shield
connectors providing rapid and
convenient installation.
PL... individual terminal block
protective covers allow the rapid
identification of live circuits.
They also limit access to the screw
clamp.
KCO transparent mounting kit
protective covers reliably restrict
access to your terminal assembly
with the possibility of sealing.
PG5 component plugs ease the
component installation (resistors
or diodes) with a quick plug-in
mounting system which avoids any
soldering.
PG5-R2 plugs fit into the terminal
block's jumper channel for com-
ponent insertion (resistors, diodes,
etc.) between two terminal blocks.
A complete set of accessories
SNK Series, Terminal Blocks