ABATRON A Division of U.C Coatings, LLC 5501 – 95th Ave., Kenosha, WI 53144 U.S.A (262) 653-2000 Fax (262) 653-2019 www.abatron.com e-mail: info@abatron.com 24 Hour Emergency No: (800) 424-9300 Safety Data Sheet SECTION 1: Product Identification Product Name: Product Code: WoodEpox A WE A Product Class: Product Type: Filled Epoxy Compounds Adhesive Epoxy Paste Recommended Use: Epoxy paste filler used to repair and restore damaged or deteriorated wood. Abatron, A Division of U.
Precautionary Statements Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF eye irritation persists: Get medical advice/attention. IF ON SKIN: wash with plenty of soap and water. IF SKIN irritation or rash occurs: Get medical advice/attention., Wash contaminated clothing before reuse. Wash hands thoroughly after handling.
Ingestion: Wash out mouth with small amounts of water and remove person to fresh air. Do not induce vomiting unless directed to do so by medical personnel. Seek medical attention immediately. If unconscious, place in recovery position. Never give anything by mouth to an unconscious person. Primary Routes of Entry: Eye and skin contact, breathing vapors.
Conditions for Safe Storage, Including Any Incompatibilities: Store in tightly sealed, original container in a cool, dry place protected from direct sunlight. Keep container sealed until use. Keep containers tightly closed when not in use. Store away from incompatible materials and food and drink. Use appropriate containment to avoid environmental contamination.
Other Information: None Percent Volatiles by Volume : <0.1 SECTION 10: Stability and Reactivity Reactivity: Product reacts exothermically with amine and amide-based curing agents. Product by itself is stable and relatively non-reactive under normal conditions of use, storage and shipping. Chemical Stability: Product is stable under normal conditions. Prolonged excessive heat may cause partial degradation.
(Epichlorhydrin); epoxy resin Reaction product: Bisphenol-ARabbit (Epichlorhydrin); epoxy resin 2 mg, 24 hours Severe Irritant Respiratory or Skin Sensitization: Sensitization is possible through skin contact. Germ Cell Mutagenicity: Component 2,3-epoxypropyl o-tolyl ether, CAS # 2210-79-9, is a suspect mutagen.
Component: Reaction product: Bisphenol-A-(Epichlorhydrin); epoxy resin Species Oncorhynchus mykiss (rainbow trout) Daphnia magna (water flea) Scenedesmus capricornutum (fresh water algae) Bacteria Result LC50: 2 mg/L EC50: 1.8 mg/L ErC50: 11 mg/L IC50: >42.6 mg/L Exposure 96 hour; semi-static 72 hour; static 72 hour; growth rate inhibition 18 hour; respiration rates Chronic (long-term) toxicity: The formulated product is moderately toxic to aquatic organisms on a chronic basis.
UN Proper Shipping Name: Hazard Class: Packing Group: Marine Pollutant: Not Applicable Not Applicable Not Applicable Not Applicable In quantities not to exceed 5kg/5L per single or inner packaging, marine pollutants are not subject to regulation by ground, air, or vessel. See 49 CFR 171.4(c)(2). SECTION 15: Regulatory Information HCS Classification: Irritating material, Sensitizing material TSCA Status: All materials are either included on or exempt from the TSCA Inventory of Chemical Substances.
SECTION 16: Other Information HMIS Rating The Hazardous Materials Identification System (HMIS) is a rating system with 0 representing a minimal risk or hazard and 4 representing a significant risk or hazard. Health Flammability Physical Hazard SDS History Version: Revision Date: Previous Update: Creation Date: Revision Notes: 2* 1 0 3.1 July 12, 2022 December 5, 2019 April 1, 2000 Updated company information THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH, BUT NO WARRANTY, EXPRESS OR IMPLIED, IS MADE.
ABATRON A Division of U.C Coatings, LLC Safety Data Sheet 5501 – 95th Ave., Kenosha, WI 53144 U.S.A (262) 653-2000 Fax (262) 653-2019 www.abatron.com e-mail: info@abatron.com 24 Hour Emergency No: (800) 424-9300 SECTION 1: Product Identification Product Name: Product Code: WoodEpox B WE B Product Class: Formulated epoxy co-reactant Product Type: Epoxy Curing Agent Recommended Use: Epoxy resin paste hardener used to repair and restore damaged or deteriorated wood.
Precautionary Statements Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Avoid contact during pregnancy/while nursing. Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Wash contaminated clothing before reuse. IF ON SKIN: wash with plenty of soap and water.
*Titanium Dioxide is considered a carcinogen as airborne, unbound particles of respirable size. The titanium dioxide in this product is bound and not airborne. SECTION 4: First Aid Measures Eye Contact: Immediately flush eyes with water for at least 15 minutes and check for and remove contacts. Do not delay. Hold eyelids apart to rinse entire eye surface. Seek medical attention if irritation persists. Continue washing if medical attention is not immediately available.
mist. Wear an appropriate respirator when ventilation is inadequate. Use appropriate safety equipment before taking any action. Methods and Material for Containment and Cleaning Up: Remove container from spill area and scrape up material and place in appropriate waste disposal container. Remove residual resin with nonflammable solvent and flush contaminated area with hot water. Do not dump waste into any sewers, on the ground or into any body of water. Avoid dispersal of spilled material and runoff.
Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Wash contaminated clothing before reusing.
Skin Corrosion/Irritation: The formulated product is considered a severe skin irritant. Brief contact may cause skin burns. Serious Eye Damage/Irritation: The formulated product is considered a severe eye irritant. Exposure may cause severe irritation with corneal injury which may result in permanent impairment of vision. Respiratory or Skin Sensitization: Sensitization is possible through skin contact. Sensitization has occurred in lab animals after repeated exposures.
Persistence and Degradability: No information for the product itself. Bioaccumulative potential: Partition coefficient n-octanol /water (log Pow): Not Available Mobility in soil: Not Available SECTION 13: Disposal Considerations Disposal considerations apply only to the product as shipped in its original container. Waste Disposal: The generation of waste should be avoided or minimized wherever possible.
Global Chemical Inventory Status: All materials are either listed, compliant with or exempt from listing on the following global inventories: Country/Region Australia Canada China EU Japan Korea New Zealand Philippines USA Inventory Name Australian Inventory of Chemical Substances (AICS) Domestic Substances List (DSL) Inventory of Existing Chemical Substances in China (IECSC) European List of Existing Commercial Chemical Substances (EINECS) Inventory of Existing and New Chemical Substances (ENCS) Existing
ABATRON, INC. 5501 – 95th Ave., Kenosha, WI 53144 U.S.A (262) 653-2000 Fax (262) 653-2019 www.abatron.com e-mail: info@abatron.com 24 Hour Emergency No: (800) 424-9300 Safety Data Sheet SECTION 1: Product Identification Product Name: LiquidWood A Product Class: Epoxide Product Code: LW-A Product Type: Liquid Epoxy Resin Recommended Use: Epoxy resin used to repair and restore damaged or deteriorated wood. Manufacturer/Supplier: Abatron Incorporated 5501 95th Ave.
Avoid breathing dust/fume/gas/mist/vapors/spray. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF eye irritation persists: Get medical advice/attention. IF ON SKIN: wash with plenty of soap and water. IF SKIN irritation or rash occurs: Get medical advice/attention., Wash contaminated clothing before reuse. IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
Eye Contact: Immediately flush eyes with water for at least 15 minutes and check for and remove contacts. Hold eyelids apart to rinse entire eye surface. Seek medical attention if irritation persists. Continue washing if medical attention is not immediately available. Skin Contact: Wipe off excess immediately and wash affected area with soap and water for at least 15 minutes. Remove contaminated clothing or shoes and seek medical attention if irritation persists. Continue washing if irritation persists.
body of water. Avoid dispersal of spilled material and runoff. All disposal methods must be compliant with all Federal, State, and local laws and regulations. SECTION 7: Handling and Storage Precautions for Safe Handling: Wear safety glasses. Do not get in eyes, on skin or on clothing. Avoid any forms of ingestion. Do not breathe vapor, mist or spray. Use only with good ventilation or use suitable respiratory protection.
Flash Point: >200 ºF (>93.3 °C) Flammability: Combustible Vapor Pressure: Not Determined Relative Density (water = 1): 1.12-1.15@ 25°C Partition Coefficient: Not Determined Decomposition Temperature: Not Determined Explosive Properties: None Evaporation Rate: Not Determined Explosive Limits: Not Determined Vapor Density (air = 1): >1 Water Solubility: Negligible Auto-Ignition Temp.
Serious Eye Damage/Irritation: The formulated product is considered a severe eye irritant. Component Reaction product: Bisphenol-A(Epichlorhydrin); epoxy resin Reaction product: Bisphenol-A(Epichlorhydrin); epoxy resin Species Eye Exposure Observation Rabbit 500 µl, 24 hours Moderate Irritant Rabbit 2 mg, 24 hours Severe Irritant Respiratory or Skin Sensitization: Sensitization is possible through skin contact.
Species Oncorhynchus mykiss (rainbow trout) Daphnia magna (water flea) Scenedesmus capricornutum (fresh water algae) Bacteria Result LC50: 2 mg/L EC50: 1.8 mg/L ErC50: 11 mg/L IC50: >42.6 mg/L Exposure 96 hour; semi-static 72 hour; static 72 hour; growth rate inhibition 18 hour; respiration rates Chronic (long-term) toxicity: The formulated product is moderately toxic to aquatic organisms on a chronic basis.
TSCA Status: All materials are either included on or exempt from the TSCA Inventory of Chemical Substances. This product does not contain any components subject to TSCA 12(b) export notification.
ABATRON A Division of U.C Coatings, LLC 5501 – 95th Ave., Kenosha, WI 53144 U.S.A (262) 653-2000 Fax (262) 653-2019 www.abatron.com e-mail: info@abatron.com 24 Hour Emergency No: (800) 424-9300 Safety Data Sheet SECTION 1: Identification of the substance/mixture and of the company/undertaking Product Name: LiquidWood B Product Class: Polyamidoamine Product Code: LW-B Product Type: Epoxy Curing Agent Recommended Use: Epoxy resin hardener used to repair and restore damaged or deteriorated wood.
Signal Word: Danger Hazard Category Statements H312 H318 H314 H317 H335 H302 H411 Harmful in contact with skin Causes serious eye damage Causes severe skin burns and eye damage May cause an allergic skin reaction May cause respiratory irritation Harmful if swallowed Toxic to aquatic life with long lasting effects Precautionary Statements P280: Wear protective gloves and eye protection. P270: Do not eat, drink or smoke when using this product. P262: Do not get in eyes, on skin, or on clothing.
3,6,9triazaundecamethylenediamine (tetraethylenepentamine) 112-57-2 0 – 10% Acute Tox. 4 H302 Acute Tox. 4 H312 Skin Sens. 1 H317 Skin Corr. 1B H314 Aquatic Chronic 2 H411 SECTION 4: First Aid Measures Eye Contact: Immediately flush eyes with water for at least 15 minutes and check for and remove contacts. Do not delay. Hold eyelids apart to rinse entire eye surface. Seek medical attention if irritation persists. Continue washing if medical attention is not immediately available.
SECTION 6: Accidental Release Measures Personal Protective Measures: Provide adequate ventilation and keep all unnecessary and unprotected personnel from entering the area. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Wear an appropriate respirator when ventilation is inadequate. Use appropriate safety equipment before taking any action.
Eye/Face Protection: Use properly fitted safety glasses. If vapor exposure causes eye discomfort, a full-face respirator may be necessary. Skin Protection: Wear protective clothing suitable to the conditions of use. Clean, body-covering clothing and protective gloves should be worn at all times when handling the product. Respiratory Protection: If local exhaust ventilation is inadequate, use a properly fitted, air-purifying mask suitable to the level of anticipated exposure.
SECTION 11: Toxicological Information Acute Toxicity: The formulated product is not considered to be acutely toxic. Component Fatty acids, tall-oil, reaction products with tetraethylenepentamine Tetraethylenepentamine Oral LD50 Dermal LD 50 Inhalation LC 50 - 1,100 mg/kg - 3.99 g/kg (rat) 660 mg/kg (rabbit) - Skin Corrosion/Irritation: The formulated product is considered a severe skin irritant. Brief contact may cause skin burns.
SECTION 12: Ecological Information Acute (short-term) toxicity: The formulated product is toxic to aquatic organisms on an acute basis. Component: Tetraethylenepentamine (following OECD Test Guidelines 203, 202 and 201 as appropriate) Species Poecilia reticulate (guppy) Daphnia magna (water flea) Pseudokirchneriella subcapitata (green algae) Result LC50: 420 mg/L EC50: 24.1 mg/L ErC50: 6.
TSCA Status: All materials are either included on or exempt from the TSCA Inventory of Chemical Substances. This product does not contain any components subject to TSCA 12(b) export notification.
