SDS

Page | 5
Flash Point: >200 ºF (>93.3 °C) Evaporation Rate: Not Determined
Flammability: Combustible Explosive Limits: Not Determined
Vapor Pressure: Not Determined Vapor Density (air = 1): >1
Relative Density (water = 1): 1.12-1.15@ 25°C Water Solubility: Negligible
Partition Coefficient: Not Determined Auto-Ignition Temp.: Not Determined
Decomposition Temperature: Not Determined Viscosity: 800-1600 cps
Explosive Properties: None Oxidizing Properties: None
SECTION 10: Stability and Reactivity
Reactivity: Product reacts exothermically with amine and amide-based curing agents. Product by itself
is stable and relatively non-reactive under normal conditions of use, storage and shipping.
Chemical Stability: Product is stable under normal conditions. Prolonged excessive heat may cause
partial degradation.
Possibility of Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions
will not occur.
Conditions to Avoid: Avoid contact with incompatible materials. Avoid excessive heat. Store between
60-90°F.
Incompatible Material: Avoid contact with strong acids or bases in bulk, and strong oxidizing
materials. Avoid bulk contact with amines, amides and other curing agents. Material reacts with
considerable heat release with some curing agents.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, acrid smoke and fumes
Hazardous Polymerization: Will not occur by itself, but hazardous polymerizations may occur with
aliphatic amines in masses greater than one pound with considerable heat buildup.
SECTION 11: Toxicological Information
Acute Toxicity: The formulated product is not considered to be acutely toxic.
Component
Oral LD50
Dermal LD 50
Inhalation LC 50
Reaction product: Bisphenol-A-
(Epichlorhydrin); epoxy resin
11.4 g/kg (rat)
>20g/kg (rabbit)
-
Butyl glycidyl ether
2.05 g/kg (rat)
788 mg/kg (rabbit)
>670 ppm (rat, 8 hr)
O-Cresyl Glycidyl Ether
5.8 g/kg (rat)
>2000 mg/kg (rabbit)
1220 ppm (rat, 4 hr)
BLO
1.54 g/kg (rat)
5640 mg/kg (guinea pig)
>2680 mg/m3 (rat, 4 hr)
Formulated Product (Liquid Wood A)
>8.4 g/kg
>1.9 g/kg
-
Skin Corrosion/Irritation: The formulated product is considered a moderate skin irritant.
Component
Species
Skin Exposure
Observation
Reaction product: Bisphenol-A-
(Epichlorhydrin); epoxy resin
Rabbit
100 mg
Mild Irritant
Reaction product: Bisphenol-A-
(Epichlorhydrin); epoxy resin
Rabbit
20 mg, 24 hours
Moderate Irritant