SDS

Page | 4
body of water. Avoid dispersal of spilled material and runoff. All disposal methods must be compliant
with all Federal, State, and local laws and regulations.
SECTION 7: Handling and Storage
Precautions for Safe Handling: Wear safety glasses. Do not get in eyes, on skin or on clothing. Avoid
any forms of ingestion. Do not breathe vapor, mist or spray. Use only with good ventilation or use
suitable respiratory protection. Persons with a history of skin sensitization problems should avoid
contact with any process in which this product is used. Do not get in eyes or on skin or clothing. Do not
ingest. Avoid breathing vapor or mist. Avoid release to the environment. Keep in the original container
or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty
containers retain product residue and can be hazardous. Do not reuse container.
Conditions for Safe Storage, Including Any Incompatibilities: Store in tightly sealed, original
container in a cool, dry place protected from direct sunlight. Keep container sealed until use. Keep
containers tightly closed when not in use. Store away from incompatible materials and food and drink.
Use appropriate containment to avoid environmental contamination. Avoid strong acids or bases in bulk,
and strong oxidizing materials. Material reacts with considerable heat release with some curing agents.
SECTION 8: Exposure Controls/Personal Protection
Occupational Exposure Limits:
OSHA PEL/TWA None available for formulated product.
ACGIH TLV/TWA None available for formulated product.
Engineering Controls: Good general ventilation should be sufficient to control worker exposure to
airborne contaminants. If user operations generate vapor, process enclosures or local exhaust may be
necessary.
Individual Protection Measures
Eye/Face Protection: Use properly fitted safety glasses. If vapor exposure causes eye discomfort, a
full-face respirator may be necessary.
Skin Protection: Wear protective clothing suitable to the conditions of use. Clean, body-covering
clothing and protective gloves should be worn at all times when handling the product.
Respiratory Protection: If local exhaust ventilation is inadequate, use a properly fitted, air-purifying
mask suitable to the level of anticipated exposure.
Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products,
before eating, smoking and using the lavatory and at the end of the working period. Wash contaminated
clothing before reusing.
SECTION 9: Physical and Chemical Properties
Physical State: Clear, colorless liquid Odor: Faint, slightly aromatic odor
Odor Threshold: Not Determined pH: Not Applicable
Melting Point/Freezing Point: Not Determined Boiling Point: >400 ºF (>204 °C)