SigmaBlade User's Guide

(English)

Network Cables

Your network cables must have the following specifications:

Connector

LC connector

(when N8406-27 10GbE XFP module installed)

Type of Cable Multimode Fiber (MMF) cable

Cable Length

(max.)

300m

IMPORTANT:

・ Contact your service representative for placing optical fiber cables.

Experts must place the cables.

・ Handle optical fiber cables carefully.

・ Keep more than 50 mm by a bending radius when you bend a optical

fiber cable.

・ Install the cable to the XFP connector straight. Do not force to install the

calbe to avoid damage it.

・ Make sure that the connector of the cable is clean and is not

damaged.

・ Make sure that your cable meets specifications for the use of the XFP

module.

・ Do not come into contact with contamination.

・ Do not give any impact or pressure to the cable and its connector. Do

not step on the cable or put something heavy on it.