Specifications

MedWeld 3000 Catalog Revision 8
July 2002
The next set of digits (400-3) signifies the breaker size and the number of
poles.
The next set of digits (1=#5) signifies the number of isolation contactors and
their size.
The last set of digits (4806) signifies the voltage and frequency. The first three
is the voltage where 480 mean that the control is wired to accept 480 Volts, and the
last number 6 means that components are rated for 60 Hz operations.
Enclosure &
Model
No. of SCRs SCR or Inverter
Rating
Circuit
Breaker
No. of
Poles
No of
Contactors
Rating of
Contactors
Primary
Voltage
Line
Frequency
3003 - 1 = 1200 - 000 2 - 1 = #3 - 240 5 (50 Hz)
3004 - 2 = 1750 - 150 3 - 2 = #4 - 380 6 (60 Hz)
3006 - 3 = 2500 - 250 … = #5 - 480
3005 - 4 = 3300 - 400 nn = - 600
3015 - 5 = - 600
3025 - 6 = MF300 - 800
3035 - 7 = MF600 - 1200
3045 - 8 = MF1200 - 2000
3055 - … =
3065 - 12 =
Multiple - 12 resistance-welding processors each with an SCR
3075 - 12C =
Cascade - 1 resistance-welding processor with 12 SCRs
3095 - 15C =
Cascade - 1 resistance-welding processor with 15 SCRs
4W12C =
Multiple with Cascade - 4 resistance-welding processors with 12 SCRs total
3015F - 1WTP =
Three Phase - 1 resistance-welding processor with one 3-Phase switch
3025F - 4WTP =
Multiple Three Phase - 4 resistance-welding processors each with a 3-Phase switch
3035F - 2W4TP =
Multiple with Cascade Three Phase - 2 resistance-welding processors with 4 3-Phase switches total
More details of model numbering scheme in each section – Check Table of Content