Specifications

MedWeld 3000 Catalog Revision 8

July 2002 Page 32 of 72

Allen-Bradley

Components

Please refer to Allen-Bradley

Publication:

1746-PL001D-EN-P -November 2001

for

description and specifications of these versatile products. Please reference

descriptions below as a guide sheet for most common parts used in the MedWeld 3005

Integrated System. These prices are subject to change since Rockwell Automation

controls them.

Fixed I/O Configuration

The fixed I/O configuration will provide the basic necessary I/O control engine to

complete a standard welding control. There are 12 inputs and 8 outputs available

with the fixed I/O block configuration. The MedWeld 3005 welding processor is

interfaced to the module by means of a 2-slot expansion module.

You have two options for this configuration; the first with a factory locked ladder and

the second with a factory open ladder. The locked ladder is stored on a UV Prom and

is meant for users who will not change the I/O configuration of their control. The

open ladder is stored on an EE Prom and is meant for users who may want to

reconfigure the I/O of their welders.

Fixed I/O Module (12 DC In / 8 Relay Out)

1747-L20C

2-Slot Expansion for Fixed I/O

1746-A2

Medar UVProm L20C, 5/01 & 5/02 1K

904-0038

Fixed configuration with factory locked ladder:

Fixed I/O Module (12 DC In / 8 Relay Out)

1747-L20C

2-Slot Expansion for Fixed I/O

1746-A2

EEPROM Mem-5/01 & 5/02 -1k

1747-M1

Fixed configuration with factory open ladder:

Flexible I/O Configurations

The flexible I/O configuration will provide from the basic necessary I/O control engine

to complete a standard welding control to that of a more complex machine controller

with various input, output and specialty modules. There are several rack

configurations, AB Processors of varied capabilities, and numerous specialty modules.

The MedWeld 3005 welding processor is interfaced to the A-B rack by inserting it in an

appropriate slot. You can insert up to six MedWeld 3005 modules in a single rack

MedWeld 3005 controls, you would use multiple racks with interconnect cables.