Specifications

SLC 500™ Power Supplies
7
1746-IN004A-ML-P
3. Connect incoming power.
!
ATTENTION:
Turn off incoming power before connecting
wires; failure to do so could cause injury to personnel and/or
equipment.
!
ATTENTION:
Your SLC 500 power supply can be damaged by
voltage surges when switching inductive loads such as motors,
motor starters, solenoids, and relays. To avoid damage to your SLC
500 power supply in these applications, it is strongly reccommended
than an isolation transformer be used to isolate the power supply
from harmful voltage surges.
120/240V ac
VAC NEUT
DC NEUT
+ 24V dc
JUMPER
170– 265V ac
L2 NEUTRAL
L1 85– 132/170–265
85– 132V ac
+125V dc
DC NEUT
CHASSIS GROUND
CHASSIS GROUNDCHASSIS GROUND
CHASSIS GROUND
CHASSIS GROUND
+48V dc
DC NEUT
CHASSIS GROUNDCHASSIS GROUND
DC NEUT
+ 12/24V dc
CHASSIS GROUND
Catalog Number
1746-P3
Catalog Number
1746-P4
Catalog Number
1746-P5
Catalog Number
1746-P6
Catalog Number
1746-P7
Catalog Number
1746-P1 & P2
Incoming
Power
Incoming
Power
Incoming
Power
Incoming
Power
P4
Incoming
Power
P4
Jumper
Selection
Incoming
Power