Specifications

SLC 500™ Power Supplies
5
1746-IN004A-ML-P
Install the Chassis Interconnect Cable (Optional)
To connect up to three SLC 500™ chassis together, install the chassis
interconnect cable before installing the power supply
.
Power Supply Installation
1. Align the circuit board of the power supply with the card guides on the left
side of the chassis
.
2. Slide the power supply in until it is flush with the chassis. Then fasten the
power supply to the chassis
.
SLC 500 chassis/A
For more information, see the
SLC 500 Modular Style
Installation and Operation
Manual
(publication 1747-6.2).
Use these screws to fasten the
power supply to the chassis.