Data Sheet

General Note This datasheet does not give any information on product availability. The information given is just meant to describe the
product and is not to be considered as guaranteed characteristics in the legal sense. All products are subject to design changes in the
interest of further technical development.
Copyright: AB Elektronik GmbH (GER) ▪ [e-mail] ▪ www.abelektronik.com
09/2017
Page 1 / 1
Technical status acc. to specification 25.02.1998
Speed Sensor (Inductive)
94064 00002
Dimensions
Cam wheel
Resistance
1050 Ω ± 10 %
Inductivity
1 H
Sealing grade
IP 54 acc. to
DIN 40050 (with
fitted female
connector)
Temperature range
-25 °C to +110°C
(130 °C / 1 h)
Mounting hole
M 18 X 1.5
Shaft length
34 ± 0.15 mm
Connector
Connector pin
6.3 x 0.8
Max. working distance
2.0 mm
hexagonal SW19