Product Brochure

The Trap-Tite Trap Seal is designed to be used in conjunction with

a code approved trap seal (often referred to as a P-trap) in drainage

systems including oor drains. Trap-Tite is available in four sizes:

2”, 3”, 3.5” and 4”.

Typical applications for the Trap-Tite include 2”, 3”, 3.5” and 4” oor

drains, basement drains, mop sink drains, and other types of drains

used in maintenance areas. The Trap-Tite blocks harmful sewer gases

and/or pests from entering a nished building space in the event that

the P-trap is not sealed with an appropriate amount of liquid.

500 Distribution Parkway, Collierville, TN 38017

PH: (800) 888-8312 | FX: (903) 853-5008

plumbing@ipscorp.com | www.ipscorp.com

LETS WATER FLOW DOWN

KEEPS BUGS & ODORS OUT

THE PROBLEM

THE TRAP-TITE SOLUTION

TRAPS

SEWER

GAS

FAST & EASY

INSTALLATION

SAVES TIME,

WATER &

ENERGY

PREVENTS

BUGS ENTERING

THROUGH DRAIN

PAGE 1
LETS WATER FLOW DOWN KEEPS BUGS & ODORS OUT The Trap-Tite Trap Seal is designed to be used in conjunction with a code approved trap seal (often referred to as a P-trap) in drainage systems including floor drains. Trap-Tite is available in four sizes: 2”, 3”, 3.5” and 4”. THE PROBLEM Typical applications for the Trap-Tite include 2”, 3”, 3.5” and 4” floor drains, basement drains, mop sink drains, and other types of drains used in maintenance areas.
PAGE 2
TRAP-TITE™ | Inline Floor Drain Trap Seal Device PRODUCT FEATURES • • • • Mitigates trap seal loss due to evaporation Prevents harmful sewer gases from entering building Protects against entry of vermin into habitable spaces Sealing rings on the outer edge of the Trap-Tite will keep device in place for the life of the product while the inner flaps will open when liquids pour down the drain. • ASSE 1072 rated AF-GW • Rated for grease-laden waste applications NOTE: A.