User Manual

Technical Details

THE PROJECTOR DOES NOT TURN ON

Possible Causes Solution

There is no power Check to ensure the power outlet source is good.

Check the power adapter to ensure a proper

connection with the wall outlet as well as the

projector. Conrm that the unit is charged and

has enough power

The power button was not held long enough To power on the projector, the power button

needs to be depressed for a full 3 seconds. Try

holding the power button until the optical engine

turns on

NO PICTURE / FILE NOT SUPPORTED

Possible Causes Solution

The video source is not properly connected or

selected

Check the video source signal to ensure that it

is properly connected. Select the current input

source by choosing the input desired from the

main menu

Incorrect le extension / Video is encoded with

incorrect codec

Please refer to “Specications” page to see which

le types and codex are supported. Verify that

the le was encoded properly.

Troubleshooting