OEM-250 Micro Projector User Manual
Table of Contents Table of Contents 1 Warnings 2 Package Contents 3 Product Overview 4 Keypad & Remote Control Functions 5 General Operation 6 External Inputs 8 PMP Menu System 10 Videos 12 Pictures 14 Music 16 eBooks 19 Games 21 Settings 25 Troubleshooting 27 Specifications 28 1
Warnings *Do not operate the Projector in direct sunlight or near heat sources such as heaters, fires, and stoves as this may cause a fire hazard. *Do not operate the projector close to sources of steam or oil such as a humidifier as this may cause electric shock. *Do not operate the projector near water such as by the sink or bathtub as this may cause electric shock. *Do not block or restrict airflow from ventilation holes as this may cause the projector to overheat.
Package Contents Projector Remote Control Tripod Composite A/V Cable USB Cable Power Cord VGA Cable 3
Product Overview Projection Lens Focus Adjustment Keypad Controls Power Button USB Input SD-HC Card Slot Audio Output AV Input VGA Input HDMI Input Power Input 4
Keypad & Remote Control Functions Volume Controls Back Menu Playback Controls Power Sources Mute Audio Power Menu Volume Controls Keystone Adjustment Navigation Controls Menu Playback Controls Escape 5
General Operation Turning on the projector To turn on the projector first plug the power supply into a suitable wall outlet and to the rear of the projector. Then power the projector on by holding the power button for 3 seconds until the optical engine turns on. Shutting down the projector To shut down the projector, press and hold the power button for 3 sec. The optical engine should shut off and the fan should stop spinning.
General Operation Accessing the Onboard Memory The OEM-250 Micro Projector includes 1GB of onboard memory. To access this memory, connect a USB cable from your computer to the back of the projector in the slot that reads “USB”. A folder will appear on your computer screen after the projector is detected. You can store any type of supported photos, video and/or files in this folder to view. Note: If your computer fails to detect the projector, check to make sure the cable is securely inserted on both sides.
External Inputs The OEM-250 micro projector can be toggled to accept different types of inputs. This includes VGA (Mini VGA), HDMI and Composite Video (3.5mm jack). To toggle through the sources, press the far right button pad or the input button on touch- on the remote control to select the appropriate source. To Connect to a VGA Source The projector can accept a VGA input signal.
External Inputs To Connect to a Composite Video Source The projector can accept a compositive video signal. This signal is comes through the 3.5mm composite A/V cable. Connect the composite A/V able to the projector and the other end into the video source. Toggle through the input sources and once you select AV input, your display should appear. To Connect to an HDMI Source The projector can accept a digital HDMI input signal.
PMP System - Main Menu The OEM-250 projector features a built-in PMP (Portable Media Player) function. This function allows the projector to play videos, pictures, music files, and text. To access the Main Menu, simply turn on the projector. The screen displayed below will appear. To navigate through the Main Menu, follow these directions: - Scroll left/right by pressing the rewind/fastforward buttons.
PMP System - Main Menu On the main menu, you can press the Menu button on your remote to bring up a more advanced options menu. This lets you change settings regarding the Image, and general Projector Setup.
PMP System - Videos The OEM-250 micro projector’s PMP system supports direct playback of a wide variety of video formats.
PMP System - Videos Playing Videos - To play/pause a video, press the play button button in the middle of the keypad or remote control. - To rewind, press and hold the left arrow button - To fast-forward, press and hold the right arrow . button - To jump forward to the next video, press the right arrow - To jump back to the prior video, press the left arrow - To adjust the volume, press Vol+ ( Vol- ( . button. button . on the remote) to increase and on the remote) to decrease the volume.
PMP System - Photos The OEM-250 micro projector’s PMP system supports direct playback of a wide variety of image formats.
PMP System - Photos Viewing Pictures The OEM-250 Micro Projector allows you to view pictures individually or in a slideshow. To view individual photos, select the file you want to view in the file menu for the particular storage device on which the image file is stored. You can press the arrow buttons on the touchpad or remote to flip through the pictures you have in the present folder.
PMP System - Music The OEM-250 micro projector’s PMP system supports direct playback of a wide variety of music formats.
PMP System - Music Listening to Music The OEM-250 Micro Projector allows you to playback music as singles or in sequence. To begin music playback, select the file you want to play in the file menu for the particular storage device on which the music file is stored. - To play/pause a song, press center button - To rewind, press and hold the left arrow of the touchpad or remote. button. - To fast-forward, press and hold the right arrow button.
PMP System - Music Library The music library can be accessed through the Music Menu. This library sorts all your music by artist, album, genre, star, year and all items.
PMP System - eBooks The OEM-250 micro projector’s PMP system supports direct playback of written text from pages of an ebook or text file. To access eBooks in memory or a SD Card, first select the “eBooks” item in the main menu: Once in the eBooks menu, there are three items that can be selected to access the device where text files are stored (Note: eBook files must be in .txt format).
PMP System - eBooks Reading eBooks The controls for ebooks is different from the other onboard programs. Please follow the directions below to better understand how to use ebooks with the OEM-250. - To go to the next page, press the Vol- button ( on the remote). - To go to the previous page, press the Vol+ button ( on the remote). - To exit the book and go back to the previous menu, press the (M) button on the far left of the control panel or at the bottom of the remote.
PMP System - Games The OEM-250 micro projector’s PMP system lets you play games through the projector.
PMP System - Games There are three pre-uploaded games in the projector for your entertainment Chess, Pick Block and Russia Block. Other games can be added to the onboard memory and you can also play games saved on a SD card.
PMP System - Games Pic Block After selecting Pick Block from the game menu, you will be shown the following four options before starting your game: - New Game: Select to start a new game - Level Setting: Select to set the diffculty of the puzzle, from 9 to 49 blocks - Select Picture: Select from five different puzzles to unscramble.
PMP System - Games Russia Block After selecting Russia Block from the game menu, you will be shown the following four options before starting your game: - New Game: Select to start a new game - Level Setting: Select to set the diffculty of the game - Exit: Select to go back to game menu Russia Block Controls - To rotate piece, press the Vol+ button ( on the remote).
PMP System - Settings The Settings Menu can be accessed by selecting “Settings” on the main menu.
PMP System - Settings Key Tone Effect The key tone is the subtle “beep” your projector makes each time you press a button within the menu and submenus. To turn this sound on/off, select Key Sound Effect from the Settings Menu. From there you will have the option to change your preference. Menu Language The projector allows you to choose from three different languages - Chinese, English and Simplified Chinese. To select your desired language, sellect Menu Language from the Settings Menu.
Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes There is no power Solution Check to ensure the power outlet or battery source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector. Confirm that the unit is charged and has enough power.
Specifications Brightness: 250 ANSI-Lumen Resolution: SVGA (800x600) Contrast Ratio: 1000:1 Noise: <30 dB Projection Lens: Manual Focus Image Size: 10 ~ 100 inches Lamp: 15,000 hour RGB Triple LEDs Video In: Composite A/V VGA HDMI Audio Output: 1 W stereo speakers 3.5 mm audio jack Storage Capacity: 1 GB Flash SD Card: SD-HC Card Slot (16GB maximum) USB: USB Data Transfer Dimensions: 138x135x49mm Weight: 1.
