User guide
Troubleshooting
27
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
There is no power Check to ensure the power outlet or
battery source is good. Check the
power adapter to ensure a proper
connection with the wall outlet as
well as the projector. Conrm that
the unit is charged and has enough
power.
NO PICTURE / FILE NOT SUPPORTED
Possible Causes Solution
The video source is not properly Check the video source signal to
connected or selected ensure that it is properly connected.
Select the correct input source by
choosing the input desired from the
main menu.
Incorrect le extension / Video is Please refer to “Specications” page
encoded with incorrect codec to see which le types and codecs
are supported. Verify that the le
was encoded properly.
IMAGE IS BLURRED
Possible Causes Solution
The projector is not in focus Adjust the focus with the focus
adjustment dial until the image
comes into focus.
Image appears stretched when Verify the output setting on device
connected to an external device is congured to 4:3 aspect ratio