Table of Contents Table of Contents Warnings Overview Remote Control Functions Packing List General Operation Startup and control Shutdown Positioning / Throw Distance / Focus Connecting to Computer (USB – VGA Input) Connecting to A/V Source Accessing the onboard memory Using Onboard Media Player Accessing SD Card Accessing Flash Memory Loading files onto flash memory Listening to music / viewing pictures Watching videos / viewing files Settings Trouble Shooting Specifications 1 2 3 4 5 6 6 6 6-7 8 8-9 9 1
Warnings *Do not operate the projector in direct sunlight or near heat sources such as heaters, fires, and stoves as this may cause a fire hazard. *Do not operate the projector close to sources of steam or oil such as a humidifier as this may cause electric shock. *Do not operate the projector near water such as by the sink or bathtub as this may cause electric shock. *Do not block or restrict airflow from ventilation holes as this may cause the projector to overheat.
Overview 03
Remote Control Functions 04
Packing List Projector Remote Control A/V Cable USB Cable Power Cord 05
General Operation Startup and Shutdown – To startup, connect the power supply or external battery to the rear power input. Press and hold the power button for 3 seconds until the welcome logo appears. To shutdown hold the power button for 3 seconds until optical engine turns off. Positioning – Position the projector at an even plane and a right angle to the desired image. If the projector is not at a right angle or on an even plane the projected image will appear distorted.
General Operation Focus Adjustment / Throw Distance – The focus can be adjusted by turning the wheel located at the front of the projector.
General Operation Connecting to a VGA / Computer input source The projector can accept a 15-pin RGB input source from a laptop’s external monitor port or graphics card. This source is connected through the 15-pin “VGA” port on the back of the projector. To connect a VGA cable, plug the VGA cable into the back of the projector. Then select the “VGA PC” option in the Main Menu. This will enable the projector to receive VGA signals. Important: Be sure to setup the computer to enable video signal output.
General Operation To connect an A/V cable insert the 3.5mm portion into the A/V port of the projector. Then click on either the “A/V input” icon in the main menu, or press “source” on the remote control and select “A/V input”. A blue screen will appear and the Projector will be ready to accept an A/V signal. Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune (optional), Playstation Portable (optional), and others. Please check www.aaxatech.
Onboard Media Player The OMP plays and supports the following files Mpeg 4, Mpeg 3, AVI, Jpeg, TXT, Real Media (RMV / RM). For supported video formats please see the “specifications” section in this manual. Pictures and videos can be accessed via an SD memory card or directly from the flash memory. To access files stored on the SD memory card first insert the SD memory card in the SD card slot located on the back of the projector. Power on the projector and select “SD Card”. The SD Card submenu will appear.
Onboard Media Player Viewing Photos – To view photos click on the “Photos” icon submenu. This will display all photos available on the SD Card. Select and click on a photo to display photos in the slideshow mode. While in slideshow mode you can scroll through slides by pressing the left or right buttons on the remote control. By pressing the menu button on the remote control you will bring up the control menu.
Onboard Media Player Playing Videos – To play videos click on the “Video” icon in the submenu. Select a video file from the list. If the video is large please allow a few moments for the projector to process the file. If after a few minutes the projector does not recover from highlighting or trying to play a video, the video is not compatible. Remove any non-compatible videos from the video from the SD Card.
Settings Menu The Settings Menu can be accessed by clicking on the “Settings” icon in the main menu. Slide Show Settings – The slide show settings allows the user to change the speed, transition style, and display mode of the slide show. “Fit to screen” or “actual size” can also be selected. When “fit to screen” is selected, file sizes will be compressed or enlarged to the native resolution of the projector which is 800x600. Pictures may become distorted when compressed or enlarged.
Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes Solution There is no power Check to ensure the power outlet or battery source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector.
Specifications PROJECTION SYSTEM Native Resolution: Brightness: Contrast Ratio: Noise: Projection Lens: Projection Image: Lamp: Projection Angle: GENERAL SPECS Audio Output: Color: Support ed Languages: Aspect Ratio Control: Dimensions: Weight: Power Consumption: Power Supply: Supported Formats: Conformances: INPUTS / OUTPUTS Video In: PC / Laptop: Audio Out: USB: Control System: STORAGE CAPACITY SVGA (800x600) 75 ANSI-Lumens 1000:1 <20 dBA Manual Focus Available Size 9 ~ 100 inch Single Chip White LED 15,
Specifications SUPPORTED FORMATS AVI, RMVB, RM, VOB, DAT, MPG, MPEG, 3GP CODECS SUPPORTED *RV: RealVideo-3, RealVideo-4 *MPEG2/1 *MP3: *RA: Cooker/AAC *LC AAC,HE AAC,MP2,PCM,AC3 *AVI (MPEG-4/MJPEG + MP3/LC AAC/HE AAC/MP2/PCM/AC3) *RMVB/RM (RV + RA) Max. bit-rate: 2 Mbps *VOB(MPEG2+AC3/MP2) *DAT(MPEG1+AC3/MP2) Max. bit-rate: 6 Mbps *MPG/MPEG(MPEG2/1+AC3/MP2) Max. bit-rate: 4 Mbps *3GP(MPEG4+MP3/LC AAC/HE AAC/MP2/AC3) Max. bit-rate: 4 Mbps MAXIMUM RESOLUTIONS *AVI, 3GP 720*480@30fps, Max.
