Manual
Connecting to the Projector (Cont)
12
HDMI ConneCtIon
When connecting to HDMI remember to set the output resolution to match the projec-
tor. The native resolution of the projector is 1280x800. Not all resolutions will match,
please try a few different resolution settings to obtain the desired display. On systems
like the Playstation 4, a safe-mode boot (on the PS4) may be needed to change the
output resolution to match.
VGA ConneCtIon
VGA connections are analog connections without “autodetection”. To connect a laptop
to the LED Projector rst set the resolution. We recommend resolutions at or near
1280x800. Depending on your device, sometimes toggling the VGA output to “ON” is
needed. Each laptop conguration is different, for example Function+F5 is sometimes
used to toggle the VGA output On / Off on laptops. Please check your device owners
manual for more detailed instructions.
RCA ConneCtIon
To connect Composite Video (RCA) connections simply connect the red, white, and yel-
low RCA cables to the included 3.5mm RCA cable. The 3.5mm port should then plug
into the 3.5mm AV port of the LED Android Projector.