User Guide

AAXA Technologies P700 HD LED Pico Projector - Troubleshooting Guide
Page 3 of 3
Projector turns off randomly
Possible Causes
Solutions
Power connection is loose
Check to see if there is a loose connection with the
wall outlet, power adapter, or the power port on
the projector.
Battery is not charged
Make sure the red LED light in front of the
projector is on. Once the projector has received a
full charge the LED light will turn to blue.
Projector is on Battery/Eco Mode
Make sure the projector is fully charged before
use. The projector has a battery capacity of about
70 minutes and should not turn off when there is
enough charge remaining.
Overheat sensor triggered
Blockage of the ventilation holes could cause
overheating and force the projector to
automatically shut off for safety reasons. Place
the projector in an open area that allows proper
air flow. Keep away from any other heat source
and extreme weather conditions.
Still need help? Please contact our customer service / technical support team via phone or email.
AAXA Technologies, Inc.
Phone: [phone]
Email: [e-mail]