User's Manual
49
Technical Details
Chapter 4
IMAGEISBLURRED
Possible Causes Solution
The Projector is not in focus Adjust the focus with the focus adjustment dial
until the image comes into focus
The Projector is offset from plane / angle of
operation
Move the projector so that it is both 180 degrees
and on an even plane with the screen
NOSYNC,NOSIGNAL
Troubleshooting
Be sure to setup the computer to enable a video signal output. On some lap-
tops this is done by pressing and holding Function F5 key. If using the P2-A as
an external monitor on Windows based systems, this can be done by selecting
“extend my desktop to this monitor”. The native resolution of the P2-A projec-
tor is 854x480 (WVGA). Depending on the video driver different resolutions may
need to be selected for proper output
50