Manualshelf

User Manual

ManualsBrandsAAXA Technologies ManualsAudio Visual PresentationP2-A 130-Lumen WVGA LED Smart Pico Projector
12345678910
Getting Started
1. Connect the power cord to the P2-A.
2. Connect the other end of the power cord into the wall power source.
3. Hold the power button for 3 seconds to start the projector.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. To turn off the projector, hold the power button for 3 seconds. This will fully turn
off the projector.
1. The P2-A needs to be plugged in and charged for four hours before operation.
Plugging In the projector
Connecting to WiFi
1. View page 6 for details.