User Manual

51
Technical Details Cont.
THEPROJECTORDOESNOTTURNON
Possible Causes Solution
There is no power Check to ensure the power outlet source is good.
Check the power adapter to ensure a proper
connection with the wall outlet as well as the
projector. Conrm that the unit is charged and
has enough power
The power button was not held long enough To power on the projector, the power button
needs to be pressed for a full 3 seconds. Try
holding the power button until the optical engine
turns on
NOPICTURE/FILENOTSUPPORTED
Possible Causes Solution
The video source is not properly connected or
selected
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
Incorrect le extension / Video is encoded with
incorrect codec
Please refer to “Specications” page to see which
le types and codec are supported. Verify that
the le was encoded properly
Troubleshooting