aaxa TECHNOLOGIES User Guide
Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving DO NOT expose to water or wet surfaces. Electric shock may occur.
Table of Contents 1 Chapter 1: LED Pico at a glance 2 Main Unit Front/Back 3 Keypad 4 Accessories Chapter 2: Getting Started 5 Powering On / OFF 6 Focus Adjustment / Throw Distance 7 Connecting to a Computer HDMI 9 Connecting to Composite Video 11 Connecting to HDMI Video 13 Connecting to Speaker or Headphones 14 Connecting a Micro SD Card 16 18 19 21 22 24 25 27 28 29 34 35 36 Connecting to a USB Host Chapter 3: Menu Screens Main menu Video Player Menu Video FAQ Photo Viewer Menu Photo FAQ Music Player M
LED Pico at a Glance Chapter 1 Main Unit Front/Back Focus Adjustment Charge Port USB Port Power Button Menu Navigation AV Input Audio Out HDMI 2
Keypad Back / Exit On / Off Directional Keys 3
Accessories A/V Cable Micro USB Cable Tripod *Under various circumstances, the actual accessories may be different from those shown in the pictures above.
Getting Started Chapter 2 Powering ON the projector 1. If you want to charge your LED Pico, simply plug in the Micro USB cable to any computer or wall adapter. 2. Once your LED Pico is charged, hold down the power button for approximately three seconds until the unit starts projecting. Powering OFF the projector 1. 2. Press and the power button once, then again to confirm. After a few seconds, the unit should turn off fully.
Focus Adjusment / Throw Distance Focus Adjustment • Spin the focus wheel up or down until the image becomes clear. Throw Distance Chart Distance inch (“) 26 38 51 63 75 Diagonal Inch (“) 17 25 34 42 50 DIA GO NA LS CR EE NS IZE 16:9 Aspect Ratio Throw Ratio 1.
Connecting to a Computer via HDMI Step 1: Connect one end of the to your computer’s HDMI Cord Step 2: Connect one end of the Step 3: HDMI Adapter to your LED Picos HDMI Cord HDMI Adapter In the Main Menu Select “INPUT” icon Select “HDMI” icon 7
Connecting to a Computer Cont. Step 4: Enabling HDMI output on your Computer – To enable HDMI output on your computer most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable HDMI output. Below are standard instructions for a Windows XP computer – not all systems are the same. Step 5: Press function & “F5” to instruct the computer to enable multiple displays.
Connecting to Composite Video Step 1: Connect one end of the Step 2: to your LED Pico’s A/V Adapter Composite Cord Connect opposite end of to your devices Composite Cord Composite Cord 9
Connecting to Composite Video Cont. Step 3: In the Main Menu Select “INPUT” icon Select “AV” icon Step 4: Turn on your multimedia device. Connectivity with multimedia devices The LED Pico can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game consoles and other peripherals with ease. *Apps on smart phones require video out capabilities to be displayed with the LED Pico.
Connecting to HDMI Video Step 1: Connect one end of the Step 2: to your LED Pico’s Mini HDMI Adapter Mini HDMI Cable Connect one end of the to your devices HDMI HDMI Adapter 14 11
Connecting to HDMI Video Cont. Step 3: In the Main Menu Select “INPUT” icon Select “HDMI” icon Step 4: Turn on your multimedia device. If available select 960x540 or 1280x800 Connectivity with multimedia devices The LED Pico can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game consoles and other peripherals with ease. *Apps on smart phones require video out capabilities to be displayed with the LED Pico.
Connecting Speakers/Headphones Step 1: Connect your speakers/headphones to the projector’s speaker adapter. 3.
Micro SD Card How to insert your Micro SD Card • Slide in your SD card into the SD card slot on the front of the LED Pico. (as shown in picture) • Gently slide the SD card until it clicks into place. How to access your Micro SD Card • Once your SD Card has been inserted, you can navigate to any media content in the main menu.. • After selecting the media content, choose the SD card selection.
Micro SD Card Cont. Media Player menu • In the Media Player selection you can choose from Videos, Audio, Pictures, and Ebooks. • Select the appropriate menu for the type of file you wish to view. File Menu System • The LED Pico will show all folders and files you have on your SD Card in the C: drive. • Use the directional buttons to navigate to different folders or files.
USB Host How to insert your USB Drive • Slide your USB Drive into USB adapter. (as shown in picture) • Gently slide the drive until it cannot go in any further How to access your USB Drive • Once your USB Drive has been inserted, you can navigate to any media content in the main menu.. • After selecting the media content, choose the USB selection.
USB Host Cont. Media Player menu • In the Media Player selection you can choose from Videos, Audio, Pictures, and Ebooks. • Select the appropriate menu for the type of file you wish to view. File Menu System • The LED Pico will show all folders and files you have on your USB Drive. • Use the directional buttons to navigate to different folders or files.
Menu Screens Chapter 3 Main Menu The LED Pico features a built in PMP (Portable Media Player) function. This function allows the projector to play videos, pictures, music files, and text. To access the main menu simply turn on the projector. • • • Scroll Left/Right by pressing the left and right directional buttons To select a submenu, highlight the desired submenu and press the OK button located in the middle of the keypad.
Video Player Menu Opening a file: • Select the video option from the main menu. • Select the hardware media the file is stored on • Choose which file you wish to play. Select the “video” icon The LED Pico will show all folders and files you have on your USB or SD Drives. Use the directional buttons to navigate to different folders or files.
Video Player Menu Playing Videos To use the video controls, use the directional keys to highlight the option you wish to choose. Move selection left • Move selection right • Confirm selection Play Video Rewind Video Fastforward Video To open the vide player menu, press “OK” on projector. To close the video player menu, hit “back” on projector.
Video Playback FAQ How do I loop a video? 1. Choose either USB or SD Card for playback 2. Navigate the folders until you reach the file you wish to play. 3. Highlight the file you want to play, then confirm the selection. 4. Move selection on video player menu to “Repeat A”, and press OK until it says “Repeat 1”. 5. The video will now loop after playback is finished.
Photo Menu Opening a file: • Select the photo option from the main menu. • Select the hardware media the file is stored on • Choose which file you wish to play. Select the “photo” icon The LED Pico will show all folders and files you have on your USB or SD Drives. Use the directional buttons to navigate to different folders or files.
Photo Menu Viewing Pictures To use the photo controls, use the directional keys to highlight the option you wish to choose. Move selection left • Move selection right • Confirm selection Start Slideshow Previous Photo To open the vide player menu, press “OK” on projector. To close the video player menu, hit “back” on projector.
Photo Slideshow FAQ How do I play a slideshow? 1. Choose either USB or SD Card for playback How do I manually control the slideshow? 1. 2. 2. Navigate to the folder that contains the pictures you wish to see in the slideshow 3. Confirm selection of the first picture. 4. Press “play” in the photo menu 5. Slideshow will not play. 6. NOTE: Selecting “repeat” will loop slideshow. 3.
Music Player Menu Opening a file: • Select the audio option from the main menu. • Select the hardware media the file is stored on • Choose which file you wish to play. Select the “Audio” icon The LED Pico will show all folders and files you have on your USB or SD Drives. Use the directional buttons to navigate to different folders or files.
Music Player Menu Listening to Audio To use the audio controls, use the directional keys to highlight the option you wish to choose. Move selection left • Move selection right • Confirm selection Play / Pause To open the music menu, press “OK” on projector. To close the music menu, hit “back” on projector.
Music Playback FAQ How do I loop a song? 1. Choose either USB or SD Card for playback How do I create a song playlist? 1. 2. 3. 2. Navigate the folders until you reach the file you wish to play. 3. Highlight the file you want to play, then confirm the selection. 4. Move selection on music player menu to “repeat”, and confirm the selection. 5. The song will now loop after playback is finished. 4. 5. 6. 7. 8. Insert your media device (either microSD card or USB) into computer.
EBook Viewer Menu Opening a file: • Choose “Open File” option • Select device file is stored on • Select file from list The LED Pico will show all folders and files you have on your USB or SD Drives. Use the directional buttons to navigate to different folders or files. Viewing text files The LED Pico Projector allows you to view text files. Select the file you want to view in the file menu for the particular storage device on which the file is stored.
Setup Menu The Settings Menu can be accessed by selecting “Settings”on the main menu Picture • • • Picture Mode Color Temperature Aspect Ratio • • • • • Sound Mode Balance Auto Volume Surround Sound EQ • • • Clock Off Time Sleep Timer • • • OSD Language Restore Factory Default Blending • OSD Duration Sound Within the settings menu there are four more submenus that allow you to customize your LED Pico to the settings you want.
Picture Settings Picture Mode • Changes the picture mode to different settings depending on your choosing. Color Mode • Adjusts the color temperature from hot to cool (red to blue).
Sound Settings Sound Mode • Change the sound mode depending on what is currently playing. Balance • Adjusts the balance of the sound, from left to right. Auto Volume • Sets the projector to auto-detect for the volume. The projector will auto detect the appropriate sound mode. Surround Sound • Adjusts the surround sound capabilities of the projector.
Time Settings Clock • Adjust the time/date. • Sets a time for auto turn off of projector Off Time On Time • Sets a time for the projector to auto turn on. Sleep Timer • Sets a timer until the projector to go into sleep mode Auto Sleep • Sets the auto sleep of the unit.
Option Settings OSD Language • Changes the language of the device. Restore Factory Default • Restores the projector to factory settings. OSD Duration • Allows the projector to set a duration for the selected OSD language.
Chapter 4 Technical Details Troubleshooting IMAGE IS BLURRED Possible Causes Solution The Projector is not in focus Adjust the focus with the focus adjustment dial until the image comes into focus The Projector is offset from plane / angle of operation Move the projector so that it is both 180 degrees and on an evern plane with the screen. No Sync, No Signal 1. Be sure to setup the computer to enable a video signal output. On some laptops this is done by pressing and holding Function F5 key.
Technical Details Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes Solution There is no power Check to ensure the power outlet or battery source is good. check the power adapter to ensure a proper connection with the wall outlet as well as the proejctor. Confirm that the unit is charged and has enough power The power button was not held long enough To power on the projector, the power button needs to be depressed for a full 3 seconds.
Specifications Brightness Native Resolution Maximum Resolution Contrast Ratio Projectoin Lens: Image Size: Lamp: Video in: Audio Output: SD Card USB: Dimensions Weight 25 Lumens 960x540 (qHD) 1920x1080(1080P) 1000:1 Manual Focus 10~50 inches Triple RGB LEDs with Vibrant Color Technology Life 15,000hrs Composite A/V HDMI(mini-HDMI) 1.0 W speaker 3.5 mm audio jack MicroSD Card Slot (32GB maximum) USB Host (Memory Sticks) 115mm x 62mm x 20mm 0.
Please direct all customer service inquiries to: AAXA Technologies, Inc. 1541 Parkway Loop Tustin, CA 92780 (714) 957-1999 info@aaxatech.
