Owner's manual
Power Bank Cont.
12
• To activate the power bank feature slide the Power Button to “Charge” mode.
A bank of indicator lights found on the back of the picture (Fig 1) will light up.
This indicates the charge state of the onboard battery.
• Each indicator light represents a 25% charge. When the device is full
(100% charged) the fully charged light on the far right will light up. Red
light means charging, yellow light means fully charged.
• When the device is nearing 10% battery capacity the 0% light will ash.
• To charge a device, use the USB port found on the side of the projector. The
USB port can deliver 5V 2A (10 Watts) of charge.
How to use Power Bank
(Fig 1)










