User's Manual

Getting Started
4
Chapter 2
1. To power-on a fully charged BP1, toggle the power switch to BT/Projector.
2. Press & Hold the “Projector On” button for 3-5 seconds
Powering ON the projector
To Turn on BT Speaker
1. Toggle Power Switch to BT/Projector.
2. Look for BT connection “AAXA-BP1”.
1. To charge your BP1, use the power adapter supplied in
the box. The LED indicator on top of the unit will light
up to show the projector is receiving power. When fully
charged the LED indicator will have 6 blue lights lit.
2. The BP1 will take approximately 7 hours to fully charge
from a full drain.
Charging the projector
NOTE: The BP1’s battery does not charge when it is in operation.
Using the Power Bank to Charge Device
1. Toggle Power Switch to Power Bank.
2. Insert charging cable into USB Port.
Charging Port