User's Manual

32
Technical Details
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
There is no power Conrm that the unit is charged and has enough
power. Make sure that the power switch is
switched to the section labeled “BT/Projector” .
The power button was not held long enough To power on the projector, the power button needs
to be depressed for a full 5 seconds. Try holding
the power button until the projector turns on.
The BP1 takes 5-10 seconds to turn on.
NO PICTURE / FILE NOT SUPPORTED
Possible Causes Solution
The video source is not properly connected or
selected
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
Incorrect le extension / Video is encoded with
incorrect codec
Please refer to “Specications” page to see which
le types and codex are supported. Verify that the
le was encoded properly.
Troubleshooting