Use and Care Manual

transporting the snow thrower. Be

sure to secure the unit while

transporting.

2.Disconnect the extension cord from

the snow thrower. Inspect the

extension cord closely for signs of

wear or damage. Replace it if it is

worn or damaged.

3.Inspect the snow thrower carefully

for worn, loose, or damaged parts.

Check connections and screws and

tighten if necessary . For repairing or

replacing parts,contact the customer

service center.

4. Store the unit, along with the

disconnected extension cord in a

locked, dry place out of the reach of

children to prevent orunauthorized

use or damage. Cover loosely with a

tarp for added protection.

Troubleshooting

Fault

Remedial action

Motor does not run

1.Check mains connection cable

2. Clean discharge channel/housing, the auger must

rotate freely.

3.Check motor carbon brush, iffinished,replace it

Motor power drops

1.Clean discharge channel/housing

2.Check augershape, if distortion, replaceitin time

Wheel drive does not

function

Check the drive wheels for damage.

Auger does not rotate

1. Clean auger housing.

2. Check the belt, if worn, replace it.

Machine vibrate

abnormally

1.Check auger, if damage,replace itin time.

WARNING: before performing any maintenance or cleaning work, always

pull out the mains plug and wait until the auger has come to a standstill.

CAUTION! Faults which can not be rectified with the aid of this table may

be rectified by a specialist company only, or customer service center.