Use and Care Manual

12
or crossing gravel or roads surface.
WARNING! Auger continues
to rotate after the motor is switch off.
WARNING! If snow blocks in
the chute do not try to remove it
before:
-Releasing the switch bar.
-Disconnecting the plug from the
power supplied.
-Do not put your hand inside the
chute or auger.
WARNING: Always ensure that
the ventilation openings are kept clear
of debris.
Extension Cords
1.You should only use extension cords
for outdoor use.
2.Do not use an extension cord over
100ft (30m).
Cord Length
50ft(15m)
100ft(30m)
Min.Wire
Gauge
(A.W.G.)
14
12
3.Before using, checkthe supply and
extension cords for signs of damaged
during use, disconnect the cord for
signs of damage or aging. If the cord
becomes damaged duringuse,
disconnect the cord from thesupply
immediately. DO NOT TOUCH THE
CORD BEFORE DISCONNECTING THE
SUPPLY.Do not use the appliance if
thecord is damaged or worn.
4.Keep extensioncord away from
auger.
Over-current Protector
This unit has anover-current protector.
In the event of a major obstruction
halting the auger, the unit will stop
running. Release the switch bar and
press the resetbutton. Thenre-start
the machine. (Fig.12)
Fig.12