Use and Care Manual

14

•Movelargerchucksofdebristothesidetobreakapartbetweenthemetalnozzleand
firebrickasnecessary.
DRY SHOP VACUUM USE
CAUTION: Emptyallashfromthecanister andcleanashfromfilters beforeusingto
vacuum upother typesofmaterial.Notdoingsocouldincreasetheriskoffireby
depositingcombustiblematerialintothecanister.
1.Beforeconnectingthepower cordtopowersource,checkthatthecanister&fi
lters
havebeencleanedofashandthevacuumisproperlyassembledwiththemetalnozzlein
place.
2.EnsuretheOn/Offswitchisintheup(OFF)position.
3.Insertthepowercordplugintoanoutletneartheareatobevacuumed,thenpush
theswitchtothelow
(ON)position.
4.OccasionallychecktheFULLindicatorduringuse.
5.Runthevacuumforabout30secondsaftercleaningiscompletetobesureany
materialremaininginthehoseissafelydepositedintothecanister.Turnoffthevacuum
bypushingtheswitchtotheup(OFF)position,then
unplugfromtheoutlet.
6.Cleanthecanisterandfiltersasexplainedinthemanual’s“MAINTENANCE”
instructionsbeforestoringthevacuum.
BLOWER USE
WARNING:
• AlwayswearsafetyeyewearcomplyingwithANSIZ87.1(orinCanada,CSAZ94.3)before
usingasablower.
