Use and Care Manual

7
(B) CONNECT PLUG AND RECEPTACLE
NOTE: AWG = American Wire Gauge.
Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the
circuit(s) or outlet(s) to be used with this
unit.For an extra measure of safety, use
receptacles with built-in GFCI protection.
WARNING! To reduce the risk
of electric shock, use a Ground Fault
Circuit Interrupter (GFCI) with a tripping
current of 30 mA or less.
WARNING:Keep the
extension cord clear of theworking
area. Position the cord so that it will
not get caught on lumber, tools, or
other obstructions while you are
working with a power tool. Failure to
do so can result in serious personal
injury.
WARNING:Check
extension cords before each use. If
damaged replace immediately. Never
use the product with a damaged cord
since touching the damaged area could
cause electric shock resulting in serious
injury.
SYMBOLS
SAFETY ALERT SYMBOL
Indicates danger, warning
or caution. May be used in
conjunction with other
symbols or pictographs.
READ OPERATOR'S
MANUAL
WARNING:Read the
operators manuals and
follow all warnings and
safety instructions. Failure
to do so can result in
serious injury to the
operator and/or bystanders
Wear protective non-skid
boots with protective steel.
Wear security gloves and
use both hands to operate
this tool.
Wear ear protection
WARNING:Loud noise
can cause severe hearing
loss. Wear ear protection
when operating this unit.
Wear eye goggles.
Thrown objectscan cause
severe eye injury.Wear eye
protection meeting current
ANSI / ISEA Z87.1 standards
Wear safety helmet!
Wear head protection
when operating this unit;
falling objects can cause
severe head injury. Use a
full face shield when
needed.
Wear respiratory
protection.